Description

Sensor, Standard distance, Monochrome, Manual focus model
Model IV-500M
Type Standard distance
Installed distance 50 to 500 mm
View Installed distance 50 mm: 25 (H) x 18 (V) mm to installed distance 500 mm: 210 (H) x 157 (V) mm
Image sensor Type 1/3 inch monochrome CMOS
Pixel 752 (H) x 480 (V)
Focus adjustment Manual
Exposure time 1/10 to 1/25,000
Lights Illumination Red LED
Lighting method Pulse lighting/DC lighting is switchable
Tools Type Shape Detection, Colour Area*1, Area*2, position adjustment
Number Detection tools: 16 tools, position adjustment tool: 1 tool*3
Switch settings (programs) 32 programmes
Image history Numbers 300 images*4*5
Condition NG only/All is selectable*5
Analysis information OFF/Statistics/Histograms is switchable Statistics: Processing time (latest value, MAX, MIN, AVE), number of OKs, number of NGs, trigger numbers, trigger errors, judgement results list by tools Histograms: Histogram, matching degree (latest value, MAX, MIN, AVE), numbers of OKs, numbers of NGs *6
Other functions HDR, HighGain, Colour filters*1, Digital zoom*2, Brightness correction, Tilt correction, White balance*1, Mask outline, Mask area, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator*7
Indicators PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input Type Non-voltage input/voltage input is switchable For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit) For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
Inputs 6 inputs (IN1 to IN6)
Function IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions Assignable functions: Program switching, Clear error, External master image registration
Output Type Open collector output NPN/PNP is switchable, N.O./N.C. is switchable For open collector NPN output: Maximum rating 26.4 V 50 mA, remaining voltage 1.5 V or lower For open collector PNP output: Maximum rating 26.4 V 50 mA, remaining voltage 2 V or lower
Outputs 4 outputs (OUT1 to OUT4)
Function Enable by assigning the optional functions Assignable functions: Total judgement result, RUN, BUSY, Error, Position adjustment result, Judgement result of each tool, Result of the logical operation of each tool, Main unit/expansion unit logical output
Ethernet Standard 100BASE-TX/10BASE-T*8
Connector M12 4pin connector*8
Network function FTP client, EtherNet/IPTM, PROFINET
Rating Power voltage 24 VDC ±10 % (including ripple)
Current consumption 0.6 A or less
Environmental resistance Enclosure rating IP67*9
Ambient temperature 0 to +50 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions*10
Shock resistance 500 m/s2, 3 times in each of 6 directions*10
Material Main unit case: Aluminium die-casting, Packing: NBR, Front cover: Acrylic, Mounting adapter: POM
Weight Approx. 270 g
*1 Colour type only *2 Possible with both the colour type and monochrome type *3 Tools can be installed by programmes. *4 When using the FTP client function: 210 pictures *5 Saves to the memory in the sensor. The images saved in the sensor can be backed up to the USB memory installed to the intelligent monitor (IV-M30) or to the PC by the software for IV (IV-H1). *6 This can be displayed on the intelligent monitor (IV-M30) or by software for IV (IV-H1). *7 Simulator can be used with the IV software (IV-H1). *8 This is for connection with the intelligent monitor (IV-M30) or software for IV (IV-H1). *9 Except when polarised filter attachment (OP-87436/OP-87437) is mounted *10 Except when IV-G dome attachment (IV-D10) is mounted
''